Turning Power On; Channel Selection; Conventional Operation - Icom IC-F14 Instruction Manual

3

■ Turning power ON

➥ Rotate [VOL] to turn power ON.

■ Channel selection

IC-F14S/F24S:
Toggle [CHANNEL SWITCH] to se-
lect the channel 1 or 2, or, push one of
[MR-CH 1] to [MR-CH 4] key to select a
channel directly.
• The memory channels 3 and 4 are avail-
able when [MR-CH 3] and [MR-CH 4]
keys are assigned.
IC-F14/F24/F26-L:
Rotate [CHANNEL SELECTOR] to se-
lect the desired operating channel, in
sequence; or, push one of [MR-CH 1]
to [MR-CH 4] key to select a channel
directly.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning the
power ON, the transceiver automatically starts scanning. Scanning
stops when receiving a call.
12

CONVENTIONAL OPERATION

[VOL]
[CHANNEL SWITCH]
[CHANNEL
SELECTOR]