Game/Midi Connector (16-1 Pin Game) - Asus NCCH-DL User Manual

3. IDE connectors (40-1 pin PRI_IDE[blue], SEC_IDE [white)
This connector supports the provided UltraDMA/100/66 IDE hard disk
ribbon cable. Connect the cable's blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray
connector to the UltraDMA/100/66 slave device (hard disk drive) and
the black connector to the UltraDMA/100/66 master device.
•
•
NCCH-DL IDE connectors
4. GAME/MIDI connector (16-1 pin GAME1)
This connector supports a GAME/MIDI module. Connect the GAME/
MIDI cable to this connector. The GAME/MIDI port on the module
connects a joystick or a game pad for playing games, and MIDI
devices for playing or editing audio files.
NCCH-DL Game connector
2-28
Refer to the hard disk drive label or documentation when setting
the device as master or slave.
Pin 20 on each IDE connector is removed to match the covered hole
on the UltraDMA cable connector. This prevents incorrect orientation
when you connect the cables.
PRI_IDE
PIN 1
SEC_IDE
PIN 1
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to pin 1.
GAME1
Chapter 2: Hardware information