Internal Connectors; Floppy Disk Drive Connector (34-1 Pin Floppy); Serial Ata Connectors (7-Pin Sata1, Sata) - Asus NCCH-DL User Manual

Hide thumbs Also See for NCCH-DL:

Table of Contents

2.7.2 Internal connectors

This connector supports the provided floppy drive ribbon cable. After

connecting one end to the motherboard, connect the other end to the

floppy drive.

NCCH-DL Floppy disk drive connector

2. Serial ATA connectors (7-pin SATA1, SATA2)

These next generation connectors support the thin Serial ATA cables

for Serial ATA hard disks. The current Serial ATA interface allows up to

150 MB/s data transfer rate, faster than the standard parallel ATA with

133 MB/s (Ultra ATA/133).

If you installed Serial ATA hard disks, you may create a RAID 0/RAID 1

configuration using the RAID feature of the Intel

to page 4-19 for the SATA configuration.

NCCH-DL SATA connectors

ASUS NCCH-DL motherboard

FLOPPY

PIN 1

NOTE: Orient the red markings on

the floppy ribbon cable to PIN 1.

SATA2

GND

RSATA_TXP2

RSATA_TXN2

GND

RSATA_RXN2

RSATA_RXP2

GND

SATA1

GND

RSATA_TXP1

RSATA_TXN1

GND

RSATA_RXN1

RSATA_RXP1

GND

6300ESB ICH. Refer

2-27

Table of Contents