Installing A Dimm; Removing A Dimm - Asus NCCH-DL User Manual

Hide thumbs Also See for NCCH-DL:

Table of Contents

2.4.3 Installing a DIMM

Make sure to unplug the power supply before adding or removing

DIMMs or other system components. Failure to do so may cause

severe damage to both the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket such

that the notch on the DIMM

matches the break on the socket.

A DDR DIMM is keyed with a notch so that it fits in only one direction.

DO NOT force a DIMM into a socket to avoid damaging the DIMM.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the DIMM

is properly seated.

Follow these steps to remove a DIMM.

1. Simultaneously press the

retaining clips outward to unlock

the DIMM.

Support the DIMM lightly with your fingers when pressing the retaining

clips. The DIMM might get damaged when it flips out with extra force.

2. Remove the DIMM from the socket.

ASUS NCCH-DL motherboard

Unlocked Retaining Clip

Locked Retaining Clip

DDR DIMM notch

2-17

Table of Contents