40-Pin Hat Connector (Cn19) - Asus AAEON UPX-EDGE-TGL01 User Manual

Pin Signal
B13 GND
B15 PCIE4_P0_TXN
B17 GND
B19 PCIE4_P1_TXP
B21 GND
B23 PCIE4_P2_TXP
B25 GND
B27 PCIE4_P3_TXP
B29 GND
B31 GND
2.3.15

40-Pin HAT Connector (CN19)

Note: PWM function (Pin 32, 33) only supported with UP Framework SDK. UPX-TGL
only has one PWM controller, and cannot output two different frequencies for PWM0
and PWM1. User can only either pick one PWM to output, or assign the same output
signal to both PWM pins under Windows.
Pin Signal
1 +3.3V
3 I2C1_DAT/ GPIO1
5 I2C1_CLK/ GPIO2
7 ANALOG_DATA / GPIO3
9 GND
11 GPIO4
13 GPIO5
Chapter 2 – Hardware Information
Pin Signal
B14 PCIE4_P0_TXP
B16 GND
B18 GND
B20 PCIE4_P1_TXN
B22 GND
B24 PCIE4_P2_TXN
B26 GND
B28 PCIE4_P3_TXN
B30 NC
B32 GND
Pin Signal
2 +5V
4 +5V
6 GND
8 UART_TX/ GPIO16
10 UART_RX/ GPIO17
12 I2S_BCLK/ GPIO18
14 GND
25