Transmitting Microphone Selection - Icom IC-A210 Instruction Manual

■ MENU mode items (Continued)
D Microphone2 Gain "MIC2 GAIN"
Set the microphone2's gain.
• –010–010 : Setting the microphone2's gain from –10 to +10.
D Sidetone Level "SIDETONE LV"
When using an optional headset (supplied from 3rd party*)
via the adapter, the transceiver outputs your transmitted
voice to the headset for monitoring.
*Ask your dealer in details.
• OFF (0) : The sidetone function is OFF.
• 001–080 : Sets sidetone level from 1 to 80.
D Transmitting Microphone Selection
"TX MIC SEL"
Set the active microphone when pushing microphone's PTT
switch.
The item allows you to control which connected microphone
is permitted to transmit.
• MIC1 : Selects microphone1.
• MIC2 : Selects microphone2.
• MIC1+2 : Selects both microphone1 and microphone2.
D Dimmer Mode "DISP MODE"
The light sensor which is built into the display is used for this
function.
Set the OLED dimmer mode.
• OFF : The dimmer function is OFF.
• AUTO : Sets the dimmer automatically depending on local
brightness.
• MANUAL : Sets the dimmer depending on Dimmer Brightness
(Low) "DISP LOW".
D Dimmer Brightness (Low) "DISP LOW"
Set the lower brightness level in the automatic adjustment
range when "AUTO" is selected at the "Dimmer Mode."
The transceiver automatically adjusts its display brightness
by the current lighting conditions.
• OFF : The key backlight sets OFF.
• 001–049 : Sets low dimmer brightness level from 1 to 49.
D Dimmer Brightness (High) "DISP HIGH"
Set the upper brightness level in the automatic adjustment
range when "AUTO" is selected in the Dimmer Mode.
• 050–100 : Sets dimmer brightness level from 50 to 100.
5
MENU MODE
05
25