Accessing The System Board Components And Drives - Lenovo 10B4 User Manual

Accessing the system board components and drives

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to access the system board components and drives.
To access the system board components and drives, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 40.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 40.
4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
Figure 12. Pivoting the drive bay assembly upward
42
ThinkCentre M73 User Guide