Hotpoint CH60GTCF Use And Installation Instructions page 35

COOKER FINISH
Vitreous Enamel
Door inner panels, pan supports, burner caps,
roasting dish, grill pan, main oven base, inside
of grill compartment.
Paint
Side panels.
Aluminium
Hotplate burner bodies, lid rear trim.
Glass
Chromium Plating
Oven shelves, grill pan grid, grill pan handle ,
grill pan handle support.
Plastic
Control knobs.
Stainless Steel
Hotplate, control panel.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
CARE AND CLEANING
CLEANING METHOD
Cloth wrung out in warm soapy water. Stubborn stains can be
removed with a cream paste, liquid cleaner or by rubbing with
fine steel wool soap pads.
Check that the cleaning agent is approved by the Vitreous
Enamel Association.
Wash with a cloth wrung out in warm soapy water only.
DO NOT USE ABRASIVES.
Similar to paint cleaning above. Use a nylon brush to remove any
cleaning materials, water or dirt from the hotplate burner bodies.
As for enamel cleaning. Polish with a clean dry cloth or kitchen
roll.
Wipe with a cloth wrung out in warm soapy water. A fine steel
wool soap pad e.g. Brillo, Ajax, or a chrome or stainless steel
cleaner may be used.
Wipe with a cloth wrung out in warm soapy water.
Wipe with a cloth wrung out in warm soapy water. Polish with a
clean dry cloth or kitchen towel. For stubborn stains, use a
proprietary stainless steel cleaner and follow the instructions on
the container.
35