Hotpoint CH60GTCF Use And Installation Instructions page 19

Note 1 When cooking automatically the Cook Period can be checked at any time by simply pressing the
Cook Period button.
Note 2 When cooking automatically the End Time can be checked at any time by simply pressing the
End Time button.
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET
COOK PERIOD
Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 1
Place food onto the correct shelf position in the oven and close the oven door(s).
Step 2
Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven
Step 3
function.
.
Step 4 Press & hold in the Cook Period button, the display will read 0.00 and the 'cookpot'
1 3 0
symbol will light up.
With the Cook Period button still held in set the required Cook Period using the "+" and "-"
buttons. Example: 1hr 30 minutes (as shown).
Step 5 Release all buttons.
.
The timer display will revert to the time of day with the 'Auto' symbol lit & 'cookpot' symbol
A
1 4 2 0
U
remaining lit.
T
O
At the end of the Cook Period the 'Auto' symbol will flash and an intermittent audible tone
NOTE: The Cookpot symbol disappears
will be heard. The audible tone will continue until cancelled. The 'Auto' symbol will continue
.
A to flash until the timer is returned to Manual operation (see below).
1 6 2 0
U
T
O
.
Step 6 Press the Manual button. The audible tone will be cancelled and the oven(s) will be
1 6 2 0
returned to Manual.
Turn the oven control(s) to the OFF position.
Step 7
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
OVEN TIMER OPERATION
19