Maintain Tools With Care; Warranty - Worx WT150 Manual

hour. If the battery pack and ambient temperature are
very cold then re-charging may take 1 to 1-1/2 hours. If
the battery pack is very hot it will not re-charge because
the internal temperature safety cutout will prevent it. If
the battery pack is very hot you must remove your bat-
tery pack from the charger and allow your battery pack
to cool first to ambient temperature and then recharging
can be started. If you charge a second battery pack im-
mediately after the first then the charger can be over-
heated. Always allow at least 15 minutes rest between
battery pack charging.
6. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES.
Charging time issues, as above, and having not used a
battery pack for a prolonged time will reduce the work-
ing life of the battery pack. This can be corrected after
several charge and discharge operations by charging &
working with your drill. Heavy working conditions such
as large screws into hard wood will use up the battery
pack energy faster than lighter working conditions. Do
o o
not re-charge your battery pack below 32 F (0 C) and
o o
above 86 F (30 C) as this will affect performance.

MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for better and safer perfor-
mance. Follow instructions for lubricating and changing 13
accessories. Inspect tool cords periodically and if dam-
aged, have repaired by authorized service facility.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls
free of dust. If you see some sparks flashing in the ven-
tilation slots, this is normal and will not damage your
power tool.

WARRANTY

LIMITED 60-DAY EXCHANGE POLICY
During the first 60 days after date of purchase, you may
exchange a tool which does not work properly due to
defects in materials or workmanship by returning the
power tool to the retailer where it was purchased. To
receive a replacement power tool, you must present a
dated proof of purchase and return all original equip-
Cordless Drill/Drivers WT1 50
NA-WT150-M-050727.indd 13 2005-7-27 17:53:09