Table of Contents
Advertisement
Appendix C. Customizing the device-driver configuration
settings
Windows Me has two device-driver configuration parameters: Auto Insert Notify
and DMA.
The Auto Insert Notify parameter enables the computer to start playing or
accessing the disc automatically after being inserted in the drive.
The DMA parameter improves computer performance by having the computer
DMA controller handle data transfers from the CD to memory, freeing the
computer microprocessor to perform more important tasks. For example, activating
DMA might make movies and games run more smoothly because the
microprocessor will be allocating more processing time to video.
Enabling DMA for Windows Me
To change the DMA parameter settings from the Windows Me desktop, do the
following:
1. Click Start --> Settings --> Control Panel.
2. Click on view all control panel options.
3. Double-click System.
4. Click the Device Manager tab.
5. Double-click CD-ROM.
6. Click on the drive that you want to modify.
7. Click the Settings tab.
8. Click to select the DMA check box.
9. Click OK.
Enabling DMA for Windows 2000
To change the DMA parameter setting for Windows 2000, do the following:
10. Click Close to close the System Properties window. A message is displayed,
11. Click OK to restart the computer.
© Copyright IBM Corp. 2004
1. Click Start --> Settings --> Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click Device Manager.
5. Click the IDE ATA/ATAPI controller to open up the tree.
6. Double-click the device that corresponds to your CD-ROM port. It is either
Primary IDE or Secondary IDE.
7. Click the Advanced Settings tab.
8. Click the Transfer Mode menu and select DMA if available.
9. Click OK.
informing you that the system settings have changed.
C-1
Advertisement
Table of Contents
