Setting The Device - Samsung SRD-442 User Manual

using the DVR

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons ( ) to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
Displays settings window for Video, Audio, CH Name,
SEQ-Dwell Time, Screen Setup, and Privacy Region.
5. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Video
- <ON/OFF> : You can turn ON/OFF the selected
channel's camera.
- <Covert1> : Shows information other than the video of
the selected channel.

For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
M 
If the channel is set to <Covert1> or <Covert2> mode, the channel's sound is not hearable.
However, the channel's sound is recorded if its Audio setting is set to <ON>, even the sound is not heard in Live
mode.
• Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.

The sound can be output for just a single channel.
40_ using the DVR
Device
Camera
Storage Device
Remote Device
POS Device
Monitor
Camera
Camera
PTZ
Video 
CH Audio CH Name
 
1 ON OFF CAM 01
 
2 ON OFF CAM 02
 
3 ON OFF CAM 03
 
4 ON OFF CAM 04
Screen Setup Privacy Region
OK Cancel
Logout
Return
SEQ-Dwell Time 

5 sec

5 sec

5 sec

5 sec