Emergency Stop Switches; Upper Front Rewind Shaft; Upper Unwind Shaft; Upper Idler - GBC 54C Installation & Operation Manual

e s
merGency top
Figure 5. Emergency Stop Switch near Operator Panel.
Four Emergency Stop (also referred to as E-Stop)
Switches are available on the Laminator. The
Emergency Stop Switches are located on all four
upper corners of the machine.
To engage the Emergency Stop Switch (A), press any
one down to stop the roller movement.
To disengage the Emergency Stop Switch, turn it
clockwise after the emergency condition has been
resolved.
Figure 6. Emergency Stop Switch on back of the laminator.
Page 5-2
s
WItches
SPIRE II Series – Installation and Operating Instructions
autoGrIp
s
haFts and
The 3 inch AUTOGRIP and Multi Core Shafts can
be used in all positions as supply or rewind shafts.
Rulers in inches and centimeters are incorporated
into each AUTOGRIP Shaft.
Figure 7. Upper Front Rewind and Upper Unwind Shafts.
a. u F
pper
The Upper Front Rewind Shaft is used to rewind
release liners or finished media.
B. u u
pper
The Upper Unwind Shaft is used to hold film or
media that will be used for the job, and to apply
brake tension.
c. u I
pper dler
The Upper Idler guides the upper lamination onto the
Top Main Roller, ensuring a constant amount of wrap
on the Top Main Roller.
m c
and ultI ore
u I
pper dler
r s
ront eWInd haFt
s
nWInd haFt