Connection Modes
You can use the following methods to connect a computer to a projector
over a network by using EasyMP Network Projection.
Related Links
• "Introduction to EasyMP Network Projection"
• "Quick Connection Mode"
Quick Connection Mode
You can connect the projector and the computer directly using wireless
communication. This allows you to project the computer screen without
making any complicated network settings.
Quick Connection Mode is only available when you install the wireless LAN
unit on the projector.
Related Links
p.8
p.14
p.18
p.4
p.8
p.8
Advanced Connection Mode
You can connect the projector and the computer using an existing network
system. To use Advanced Connection Mode, you need to connect the
projector to an access point or to a network hub.
p.8
p.14
p.15
p.20
p.21
8