Projecting Movies; Supported Movie Files; Using Movie Sending Mode - Epson EasyMP Network Projection Operation Manual

Projecting Movies

You can project movies smoothly by using Movie Sending Mode.
Related Links
• "Using Additional Functions"
• "Supported Movie Files"
p.37
• "Using Movie Sending Mode"

Supported Movie Files

The following movie file types are supported.
a
You cannot project files protected by digital rights management
(DRM).
File Type Movie Codec
(Extension)
.mpg MPEG-2
.mpeg
.mp4 MPEG-4 ASP
H.264/MPEG-4
AVC
.wmv WMV9
.asf
Related Links
• "Projecting Movies"
p.37
p.34
p.37
Audio Codec Recording Quality
MPEG-1 Layer 1/2 Maximum frame
You can play MPEG rate: 30 fps
contents without audio. Maximum resolu-
Linear PCM and AC-3 tion: 1280 × 720
are not supported.
MPEG-4
AAC-LC
WMA

Using Movie Sending Mode

You can send movie files directly to the projector by using Movie Sending
Mode. This allows smoother play back of movies than by projecting them
from another application on your computer.
You can also select multiple files and play them repeatedly from first to
last.
• Some projectors may not support Movie Sending Mode.
a
• You can use Movie Sending Mode to send a movie to a single
projector. You cannot send a movie to multiple projectors at the
same time using Movie Sending Mode.
• The image and sound may skip or stop depending on the
communication method and electromagnetic wave conditions.
a
Make sure the toolbar display is set to Full.
b
Click the button on the toolber.
The projector selection screen is displayed.
37