Multi Pc Projection; When A Connection Is Made Using Easymp Multi Pc Projection, A Powerpoint Slide Show Cannot Be Started; When A Connection Has Been Made Using Easymp Multi Pc Projection, The Screen Will Not Be Refreshed When Using An Office Application - Epson PowerLite Pro G6050W Operation Manual

Solving Problems
No audio from the projector when connecting with EasyMP Multi PC Projection
Check
Are multiple projectors connected to one computer?
Are you projecting a divided screen from multiple
computers?
Is audio set to output from the computer in Set options?

When a connection is made using EasyMP Multi PC Projection, a PowerPoint Slide Show cannot be started.

Check
Was EasyMP Multi PC Projection started while PowerPoint
was running?
(For Windows)
When a connection has been made using EasyMP Multi PC Projection, the screen will not be refreshed when using an Office
application.
Check
Is the mouse moved continuously?
Audio can only be transferred to one projector. Cut the current connection, and then select one
projector from the search screen.
You can only output the computer's audio from the projector when projecting one computer's screen
at full screen. Only project one screen.
s "Changing the Number of Projected Screens"
Select Output audio from the projector on the Audio Output tab in Set options.
s "Audio Output Tab" p.46
When connecting with EasyMP Multi PC Projection, make sure you close PowerPoint first. Slide Show
might not run if connecting while PowerPoint is running.
When you stop moving the mouse pointer, the screen is updated. If the screen does not update
quickly, stop moving the mouse pointer.
Remedy
p.24
Remedy
Remedy
38