Using Additional Functions; Changing The Computer Projection Source - Epson EasyMP Network Projection Operation Manual

Changing the Computer Projection Source

You can change the computer from which you are projecting which allows
you to change presenters during meetings, for example.
a
If a connection is made while Disable interrupt connection is set on
the search and connect screen, the connection is not switched to
another computer.
a
Start EasyMP Network projection on the computer you want to
project from.
b
Follow standard procedures to connect the projector and a
computer.
The computer that is currently connected is disconnected, and the projector
connects to the computer that is currently trying to connect.
Related Links
• "Using Additional Functions"
• "Connecting the Projector and a Computer Directly Using Wireless
Communication" p.18
• "Connecting the Projector and a Computer over a Network System
(Wireless)" p.20
• "Connecting the Projector and a Computer over a Network System
(Wired)" p.21
p.34
35