Epson EasyMP Network Projection Operation Manual page 64

Search and Connect Screen
Standby
Busy
Busy (Disable
interrupt con-
nection)
Currently in
use by another
application
Searching
Not found.
Not acquired
D
Projector name Displays the projector's name.
E
Update list (Quick Updates Status and Signal intensity.
Connection Mode
only)
Available.
Available. When you click Con-
nect, the computer currently con-
nected is disconnected and your
computer is connected.
Cannot be selected. Disable inter-
rupt connection is set on another
computer that is already connec-
ted.
The projector's Configuration
menu is open. You can select it
after closing the Configuration
menu and running the search
again.
Displayed while running Manual
search or searching with a profile.
Displayed when a projector can-
not be found as a result of Man-
ual search or search with a profile.
Available. Displayed when a pro-
jector with security settings ena-
bled is found in Quick Connec-
tion Mode.
F
Disable interrupt Select to prevent an interrupt connection by other
connection computers while connected to the selected projec-
tor.
G
Use multi-display Select when using the multi-screen display function.
When this is selected, Display layout and Display
properties (Display preferences) are displayed at the
bottom of the screen.
H
Displays the EasyMP Network Projection Trouble-
Troubleshooting
shooting screen.
I
Connect Connects to the projector you selected from the
search results list. When a connection is made with
a projector, a toolbar is displayed.
J
Set options Displays the Set options screen to make option
settings such as the processing method when
EasyMP Network Projection starts.
K
Save in the profile Saves the results of a network projector search as a
profile.
L
Clear list Deletes all search results.
M
SSID (Quick Con- Displays the projector's SSID.
nection Mode only)
N
Signal intensity Displays the signal intensity when a connection is
(Quick Connection made in Quick Connection Mode. As the Signal
Mode only) intensity increases, so does the number of lit in-
dicators.
O
Searches for a projector on the network using a
profile saved using Save in the profile.
Profile
P
IP address (Ad- Displays the projector's IP address.
vanced Connection
Mode only)
Q
Display Select the display number (when Use multi-display
is selected).
64