Set Options; General Settings Tab - Epson EasyMP Network Projection Operation Manual

Set options

You can make option settings such as the processing method when EasyMP
Network Projection starts.
Access Set options from the main screen of EasyMP Network Projection.
a
Click Set options on the EasyMP Network Projection main screen.
The Set options screen is displayed.
b
Set each of the items.
Confirm the details of the set items in the following sections. When
you have made all the necessary settings, click OK to close the Set
options screen.
a
You can also access Set options by clicking
you access Set options from toolbar, the General setting tab is not
displayed.

General settings tab

Use full-screen
video transfer
Encrypt
communications
Display Connection
Mode Selection
window on startup
on the toolbar. When
Search method on
startup
Plays back a movie file at full screen. If the projector does
not support movie sending, this function cannot be set.
Select to Encrypt and transmit data. Even if data is
intercepted, it cannot be decrypted.
When using Quick Connection Mode, make sure you
always select this checkbox.
Set whether or not the Quick Connection Mode/Advanced
Connection Mode screen is displayed when EasyMP
Network Projection starts.
Clear this checkbox once you have settled on a regular
startup method.
Select from the following projector search methods
executed when EasyMP Network Projection is started.
Automatic search on startup
Specify search method after startup
Search with the last network configuration
32