Procedure Before Using The Multi-Screen Display Function; Setting The Virtual Display; Enable The Virtual Display Driver (Windows Only) - Epson EasyMP Network Projection Operation Manual

Using Multi-Screen Display
Arrangement example 2
A
Actual monitor image
B
Image of virtual display
PowerPoint file presenter tools
Slide Show using a PowerPoint file
Procedure Before Using the Multi-screen Display
Function
a
Set the virtual display.

"Setting the Virtual Display"

s
In a Windows environment, enable the virtual display
necessary. Also, for both Windows and Mac OS, set up the virtual
display arrangement.
b
Allocate the image to be projected.
"Allocating the Image to be Projected"
s
Open the file to be projected, and then move the screen to the
virtual display according to the actual projection arrangement.
c
Project the allocated images.
"Projecting the Allocated Images"
s
Allocate a virtual display number to a projector, and then start
projection.
Setting the Virtual Display
This section explains the virtual display for arrangement example 1.
"Example of Adjusting the Virtual Display"
s

Enable the virtual display driver (Windows only)

Enable the virtual display g driver. Those users listed below do not have to
perform this operation. Go to the following section.
"Adjusting the Virtual Display"
s
p.24
g driver as
p.29
p.29
p.23
p.25
24