Optimizing Your Hdtv Picture - Motorola DCT6200 User Manual

Optimizing Your HDTV Picture

If you have connected your DCT6200 using a DVI connection, you may skip this step. The DVI
connection automatically configures your high definition settings.
You can view and configure your high definition settings on the DCT6200's on-screen menu.
1
To access the on-screen menu, power on your TV and power off the DCT6200.
2
MENU
Press the key on the front panel. The on-screen menu is displayed on your TV screen. (Your
user settings will also be displayed on the front panel LED of the DCT6200.) An example is shown
below:
If the on-screen display menu doesn't appear on your HDTV screen, your TV may not support the
default standard definition setting (480i). Use the DCT6200 front panel LED to view and change your
settings.
Use your remote control or the cursor keys on the front panel to navigate the on-screen display:
•
The ► key indicates the position of the cursor
•
Press the ▲ and ▼ keys to highlight the setting you wish to change
•
Press the ► key to select an option for that setting
•
To exit the setting and move to another setting, use the ▲ and ▼ keys
•
To exit the menu and save your settings, press the
3
The first user setting is TV Type. This selection tells the DCT6200 what type of TV you have and how
you prefer to watch widescreen programming.
Press the ► arrow key to select the TV type:
Select . . . If you have . . .
16:9
A wide screen TV. This is the default setting.
4:3
A standard TV and you prefer to watch widescreen programming in its original aspect
LETTERBOX
ratio (letterbox format)
4:3 PAN/SCAN
A standard TV and you prefer to watch widescreen programming that is cropped to fill
your screen
POWER MENU
or
24
key