CONNECTING YOUR DCT6200 TO AN HDTV AND D-VHS
To record high definition programming, you must have a D-VHS digital VCR and connect to the
IEEE 1394 connector on your DCT6200.
For the connections described below you will need the following cables:
To connect your DCT6200 to an HDTV and D-VHS digital VCR:
1
Connect an RF coaxial cable to the cable wall outlet and the
2
Connect an IEEE 1394 cable to the IEEE 1394 connectors on your DCT6200 and D-VHS digital VCR.
3
Connect an IEEE 1394 cable to the IEEE 1394 connectors on your D-VHS digital VCR and HDTV.
The IEEE 1394 is a video and audio connection so no audio connections are required if you are using the
IEEE 1394 connection.
On-screen graphics will not be displayed when you are using the IEEE 1394 connection on the rear panel
of the DCT6200.
After you have finished connecting your DCT6200, see "Setting Up Your New DCT6200 for Digital Cable
Services" on page 22.
RF (75 ohm)
(supplied)
IEEE 1394
D-VHS
IEEE-1394
13
a`qSOMM=rëÉê=dìáÇÉ
(2)
CABLE IN
connector on the DCT6200.
IEEE 1394