Power Supply - Silvercrest SP-2010 User Manual And Service Information

2.1 loudspeaker system in a contemporary design

Hide thumbs Also See for SP-2010:

Table of Contents

English

Power supply

Only use the 2.1 loudspeaker system if the voltage stated on the rat-

ing plate complies with the voltage of your mains socket (the rating

plate is attached on the underside of the subwoofer). Incorrect volt-

age can irreparably damage the device.

The mains switch on the subwoofer does not disconnect the device

completely from the mains power supply. To completely disconnect

the device from the mains power supply, always remove the mains

plug from the mains socket. For this reason the subwoofer should be

positioned so that direct and unobstructed access to the mains socket

is ensured and the mains plug can be immediately pulled out in an

emergency.

To prevent a fire hazard if the device is not in use for a prolonged pe-

riod (e.g. during holidays), the mains plug should always be discon-

nected from the mains socket.

Before stormy weather when there is the risk of lightning, disconnect

the device from the mains power supply.

Silvercrest 2.1-Speaker System SP2010

Table of Contents