EXERCISE GUIDELINES
WARNING:
or any exercise program, consult your physi-
cian. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is in-
tended only as an exercise aid in determining
heart rate trends in general.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your "training zone." The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
Before beginning this
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exer-
cise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic ex-
ercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretch-
ing. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
28
Need help?
Do you have a question about the PERFORMANCE 400 and is the answer not in the manual?
Questions and answers
I purchased model PFTL59510.0 and I **** in search of a Proform treadmill similar to this one.
The ProForm treadmills similar to model PFTL59510.0 include the ProForm 415 Crosswalk Treadmill (23723.3 / 237233) and the ProForm XP 680 Crosstrainer Treadmill (24646.0 / 246460).
This answer is automatically generated
pro-form 400e starts but won't stay running.
The ProForm PERFORMANCE 400 treadmill may start but not stay running due to several possible reasons:
1. Safety Key Issue – If the safety key is not properly inserted or gets disconnected, the treadmill will stop.
2. Motor or Belt Problem – A faulty motor, loose drive belt, or worn-out walking belt can cause the treadmill to stop.
3. Overheating or Overload – If the treadmill overheats or detects excessive load, it may shut off as a safety measure.
4. Power Supply Issue – Inconsistent power supply, a loose power cord, or a tripped circuit breaker can interrupt operation.
5. Console or Sensor Malfunction – If the console is not detecting movement correctly, it may stop the treadmill.
To diagnose the issue, check the safety key, ensure the belt is properly aligned, confirm the power source is stable, and inspect the motor for overheating.
This answer is automatically generated
My motor seems to be very loud. What could cause it to run loud?
The document does not provide specific reasons for the motor of a ProForm PERFORMANCE 400 running loudly. However, loud motor noise in treadmills is commonly caused by worn motor bearings, a loose or damaged drive belt, or buildup of dust and debris inside the motor area. Regular maintenance and inspection may help identify and resolve such issues.
This answer is automatically generated