Table of Contents
Advertisement
13. Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Attach the Latch Bracket (6) and Storage Latch
(51) to the Base (95) with two 3/8" x 2" Bolts (8)
and two 3/8" Nuts (10).
Attach the upper end of the Storage Latch (51)
to the bracket on the Frame (55) with a 3/8" x 2"
Bolt (8) and a 3/8" Nut (10). Note: It may be
necessary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 24).
14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 26 and 27).
13
10
Latch Knob
13
55
8
51
Large
Barrel
6
95
8
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PERFORMANCE 400 and is the answer not in the manual?
Questions and answers
I purchased model PFTL59510.0 and I **** in search of a Proform treadmill similar to this one.
The ProForm treadmills similar to model PFTL59510.0 include the ProForm 415 Crosswalk Treadmill (23723.3 / 237233) and the ProForm XP 680 Crosstrainer Treadmill (24646.0 / 246460).
This answer is automatically generated
pro-form 400e starts but won't stay running.
The ProForm PERFORMANCE 400 treadmill may start but not stay running due to several possible reasons:
1. Safety Key Issue – If the safety key is not properly inserted or gets disconnected, the treadmill will stop.
2. Motor or Belt Problem – A faulty motor, loose drive belt, or worn-out walking belt can cause the treadmill to stop.
3. Overheating or Overload – If the treadmill overheats or detects excessive load, it may shut off as a safety measure.
4. Power Supply Issue – Inconsistent power supply, a loose power cord, or a tripped circuit breaker can interrupt operation.
5. Console or Sensor Malfunction – If the console is not detecting movement correctly, it may stop the treadmill.
To diagnose the issue, check the safety key, ensure the belt is properly aligned, confirm the power source is stable, and inspect the motor for overheating.
This answer is automatically generated
My motor seems to be very loud. What could cause it to run loud?
The document does not provide specific reasons for the motor of a ProForm PERFORMANCE 400 running loudly. However, loud motor noise in treadmills is commonly caused by worn motor bearings, a loose or damaged drive belt, or buildup of dust and debris inside the motor area. Regular maintenance and inspection may help identify and resolve such issues.
This answer is automatically generated