Table of Contents
Advertisement
7. Identify the Right Base Cover (91) and the Left
Base Cover (88). Slide the Right Base Cover
onto the Right Upright (85). Slide the Left Base
Cover onto the Left Upright (84).
8. Remove the tie from the bracket on the Right
Handrail (83). If necessary, press the 5/16"
Cage Nuts (38) back into place.
Hold the Right Handrail (83) near the Right
Upright (85). Insert the Upright Wire (87)
through the indicated bracket on the Right
Handrail, and pull the Upright Wire out of the
end of the Right Handrail.
Attach the Right Handrail (83) to the Right
Upright (85) with three 5/16" x 1" Bolts (4) and
two 5/16" Star Washers (13) as shown. Do not
tighten the Bolts yet.
Attach the Left Handrail (not shown) in the
same way. Note: There is no wire on the left
side.
7
84
88
8
87
4
13
83
10
85
91
38
Tie
4
85
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PERFORMANCE 400 and is the answer not in the manual?
Questions and answers
I purchased model PFTL59510.0 and I **** in search of a Proform treadmill similar to this one.
The ProForm treadmills similar to model PFTL59510.0 include the ProForm 415 Crosswalk Treadmill (23723.3 / 237233) and the ProForm XP 680 Crosstrainer Treadmill (24646.0 / 246460).
This answer is automatically generated
pro-form 400e starts but won't stay running.
The ProForm PERFORMANCE 400 treadmill may start but not stay running due to several possible reasons:
1. Safety Key Issue – If the safety key is not properly inserted or gets disconnected, the treadmill will stop.
2. Motor or Belt Problem – A faulty motor, loose drive belt, or worn-out walking belt can cause the treadmill to stop.
3. Overheating or Overload – If the treadmill overheats or detects excessive load, it may shut off as a safety measure.
4. Power Supply Issue – Inconsistent power supply, a loose power cord, or a tripped circuit breaker can interrupt operation.
5. Console or Sensor Malfunction – If the console is not detecting movement correctly, it may stop the treadmill.
To diagnose the issue, check the safety key, ensure the belt is properly aligned, confirm the power source is stable, and inspect the motor for overheating.
This answer is automatically generated
My motor seems to be very loud. What could cause it to run loud?
The document does not provide specific reasons for the motor of a ProForm PERFORMANCE 400 running loudly. However, loud motor noise in treadmills is commonly caused by worn motor bearings, a loose or damaged drive belt, or buildup of dust and debris inside the motor area. Regular maintenance and inspection may help identify and resolve such issues.
This answer is automatically generated