Performing A Search With A Profile; Making A Profile - Epson PowerLite 1835 Operation Manual

Connecting to a Projector on a Different Subnet
B
Enter the IP address or the projector name for the projector
you want to connect to, and click OK.
The search results are displayed on the EasyMP Network Projec-
tion projector selection screen.
Provided the target projector has been identified, select that projec-
tor, and then click Connect to establish a connection.
Once you have saved projector information as a profile, you do not
have to specify the relevant details every time you perform a search.
s "Making a Profile"

Performing a Search with a Profile

You can save a search for a frequently used projector as a profile. A
profile is a file containing all of the information pertaining to a given
projector, such as the projector name, its IP address, and SSID. You can
specify a profile to search for a projector instead of specifying relevant
details such as the IP address and projector name. For example, by
creating a group of profiles for each place where a projector is setup and
managing them with folders, the target projector can be found quickly.
This section explains how to create and edit a profile.
p.18

Making a Profile

Profiles are made by saving search results.
For details on how to edit a previously saved profile, see the following
section.
s "Managing a Profile" p.20
A
While the projector is displayed on the EasyMP Network
Projection projector selection screen, click Save in the
profile.
The Save in the profile screen is displayed.
18