Adjust Performance Tab; Audio Output Tab - Epson EasyMP Network Projection Operation Manual

Using Set options
The Edit profile dialog box is displayed. s
Edit profile
Windows only
Switch LAN
The Switch Network Adapter dialog box is displayed. This
is used when it is necessary to switch the network adapter to
be used for a search when a computer has multiple
adapters.
By default, all of the network adapters are used to perform a
search. When a Wired LAN is always used as the
connection method, select a Wired LAN adapter.
Restore Defaults You can reset all adjustment values for Set options to their
default settings. However, you can retain settings for Edit
profile and Switch LAN in General settings.

Adjust performance tab

The performance can be set to Fast, Normal, and
Performance
Fine.
adjustment slider
Set to Fast when movie projections are interrupted.
p.32
Transfer layered
window
Restore Defaults
q
When you click
is displayed.

Audio Output tab

Because this projector does not support the audio sending function, settings
on the Audio Output tab are disabled.
Windows only (excluding Windows Vista and
Windows 7)
Set whether or not to transfer a layered window.
The layered window is in use when contents such as
messages displayed on the computer are not projected
by the projector. Select this checkbox to project
contents such as messages that use the layered
window.
Clear this checkbox if you do not want the mouse
pointer to flicker on the screen.
You can reset all adjustment values for Set options to
their default settings. However, you can retain settings
for Edit profile and Switch LAN in General settings.
on the toolbar, only the Adjust performance tab
35