Label - Konica Minolta magicolor 1680MF User Manual

Label

A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Orientation Face up
Driver
Media Type
Use label sheets that are
Recommended for laser printing
DO NOT use label sheets that
Have labels that easily peel off or have parts of the label already removed
Have backing sheets that have peeled away or have exposed adhesive
Are precut or perforated
3-6
Tray 1
Labels
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Do not use
Shiny backed paper
Up to 50 sheets, depending on their thick-
ness
OK to use
Full-page labels
(uncut)
Print Media