L2Tp - LevelOne WBR-6003 User Manual

L2TP

First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example: Use Static
1. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP assigned
to you.
2. Server IP Address: the IP address of the PPTP server.
3. PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
4. Connection ID: optional. Input the connection ID if your ISP requires it.
5. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
6. Connection Control: There are 3 modes to select:
• Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
• Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
• Manually: The device will not make the link until someone clicks the connect-button in the
Status-page.
28