LevelOne WBR-6003 User Manual page 79

2. How can I use AES encryption of WPA-PSK to connect?
A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the
below:
If SSID is default and click "Properties" to check if the driver of wireless client supports AES
encryption.
3. When I use wireless to connect the router, but I find the signal is very low even if I am close
to the router?
A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and
verify what the problem is.
79