Table of Contents
Advertisement
Checking LED Indicators
LED
Power
TX Link/Act
FO Link/Act
FDX
Speed
Status
Supported SFP Modules
The system's SFP ports support the following types of SFP modules:
Diameter
Standard
1000BASE-SX
1000BASE-LX
8
Color
Green
Turns on when power is connected.
Turns on when the connection between remote device and
TX cable is established.
Green
Blinks when transferring data.
Blinks when fiber optic cable connection is disconnected in
Orange
LLF Mode.
Turns on when the connection between remote device and
fiber optic cable is established.
Green
Blinks when transferring data.
Blinks when fiber optic cable connection is disconnected in
Orange
LLF Mode.
Green
Turns on in Full Duplex Mode, turns off in Half Duplex Mode.
Turns on when TX is operating on 100M network. Turns off
Green
when connected at 10M or disconnected.
Orange
Turns on when TX is operating in 1000M network.
Turns on when TX and FO are connected.
Green
Blinks during loopback test.
Turns on when connection to TX or FO is disconnected.
Orange
Blinks when diagnostics fails.
Wavelength
(um)
(nm)
50/125
850
62.5/125
850
9/125
1310
Operation
Length Mode Connector
500m
Multi
300m
Multi
10Km Single
SFP Module
LC
Finisar
FTLF8519P3BNL
LC
Finisar
LC
FTLF1318P3BTL
Advertisement
Table of Contents
