Table of Contents
Advertisement
Back
Adapter input
SFP Slot
1
LED indicators
2
RJ45 port
3
Adapter input
4
DIP switch
5
Installation
Extending fiber optic cable using two DA-MC1101 units***
1
Connect the Video In port of DirectIP™ NVR and RJ45 port of DA-MC1101 #1
using a UTP cable.
2
Insert an SFP module into SFP slot of DA-MC1101 #1 and connect the fiber optic
cable to the module.
The connection distance can be extended to 500m to 10km using fiber optic cables.
4
5VDC
4
Insert the SFP module and connect the fiber optic cable.
Shows the status of DA-MC1101. Refer to "Checking LED
Indicators" for more details.
Use the RJ45 port to connect the UTP cable.
Connect a 5V DC adapter. Connect the adapter first before
turning the device On.
Settings of DA-MC1101 can be changed using the DIP
switches.
Refer to "DIP Switch Settings" for more details.
FO TX
Diag
Link / Act
ON
1 2 3 4 5 6 7 8
5
DIP switch
Advertisement
Table of Contents
