Advertisement
Accessing the USB Ports
There are two covers over the USB ports. If you would like
access to these ports, you will need to cut the covers off using
a sharp bladed object, such as an X-Acto blade. Be sure to
remove the system before attempting to remove the covers.
Note that removal of the covers is permanent.
To remove the covers, carefully cut along the outside of the
padded covers over the USB ports (See Figures 5 and 7).
Caring for the Case
The convertible bump case is made of rugged materials, and
is designed to withstand daily use. Treat the case as you
would a quality briefcase or purse.
Occasionally, the case may become soiled. To clean it, brush
it with a short-bristled brush. If necessary, use a clean cloth
and warm soapy water to wash the soiled area. Do not
submerge the case in water, as it may become warped.
7
Advertisement
