Clock Functions - AEG BE5003021 User Manual

Button
,
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display
show that the oven temperature increases or decrease.

CLOCK FUNCTIONS

SYMBOL
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use
firmation.
Setting the DURATION or END
1. Press
or
2. Press
3. Press
4. Press
5. Press
A sound operates after the time ends for 2 minutes.
flash in the display. The oven stops.
Function
MINUS, PLUS
MINUTE MINDER
TEMPERATURE
FUNCTION
MINUTE MINDER
TIME OF DAY
DURATION
END
again and again until the display shows
flashes in the display.
or to set minutes.
to confirm.
or to set the necessary hour.
to confirm.
To set a value for time
To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
To check temperature inside the oven cavity.
To check the Core Core Temperature Sensor
temperature, when is connected (if applica-
ble). Use only when the oven function is set.
Use to set a countdown time. This function has no effect on
the operation of the oven.
To set, change or control the time of day. Refer to 'Setting the
Use only when the oven function is set to set how long the
Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
or wait 5 seconds for an automatic con-
Clock Functions
Description
come on one by one. The bars
DESCRIPTION
time of day'.
oven operates.
matically later.
or .
or symbol and time setting
11