Advertisement
movement does not restart and the hands do not spin.
A: Remove the battery and press the Q-Set button 20 times to
discharge electricity. Leave the battery out for 15 minutes.
Install a fresh C LR14 alkaline battery. The hands should sin to
4, 8 or 12 o'clock.
A: Check battery voltage. 1.48-1.7 volts are best for optimum
performance.
Troubleshooting
The wonderful advantage of owning a radio-controlled clock is
that it is virtually trouble free. If the clock receives a clear time
signal, it will set itself perfectly. If it does not receive a time
signal, consider the following:
Battery: The clock must have a fresh Alkaline battery to
receive and process the time signal.
Location: Try a different location, ideally near a window.
Your clock should be at least six feet from computers, TVs,
air conditioners, other radio-controlled clocks and other
electrical appliances that cause interference.
Weather: Electrical storms between you and Colorado
during the night will interfere with the WWVB signal.
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or
Rechargeable Batteries
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for
public information. It is intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids
warranty.
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time
warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
www.lacrossetechnology.com/support
Page | 5
Advertisement
