Selecting A Stitch; Selecting A Font - Husqvarna Viking Eden Rose 250C Limited Edition User Manual

Selecting a Stitch

Press the Stitch Menu button to select a stitch menu.
Use the arrow buttons to select among the menus:
1. Utility stitches
2. Quilt stitches
3. Decorative stitches
4. Decorative stitches
U. My Stitches
The name and number of the selected menu is shown
at the bottom of the display. The stitches are pictured
inside the lid of your machine with the menu numbers
on the left and the stitch numbers within the menus
across the center.
When you have selected the menu, press the number
of the stitch you wish to use with the Stitch Selection
buttons, or press OK and the fi rst stitch in the selected
menu will be selected (stitch number 10). Press the
Stitch Menu button again to close the selection menu
without making any selection.
Stitches 0-9 are the same in all stitch menus. If you
press any of the Stitch Selection buttons once, you
select the stitch illustrated on that button immediately,
regardless of the selected stitch menu.
By pressing two digits in quick succession you will be
able to select a stitch from 10 and up from the selected
stitch menu. If the stitch number does not exist in the
selected menu you will hear a beep and the fi rst entered
digit will be selected as a stitch.
The selected stitch menu, stitch and stitch number will
be visible on the GraphicDisplay in Sewing Mode. To
select another stitch in the same menu just press the
number of the stitch or use the left and right arrow
buttons to step stitch by stitch in numerical order. To
select a stitch in another menu you will fi rst need to
change stitch menu and then select the stitch.

Selecting a Font

Press the Font Selection Menu button to open the
Font Selection Menu. Use the arrow buttons to select
among the fonts:
Block, Brush Line, Cyrillic Alphabet, Hiragana
Alphabet
Press the OK button. This automatically opens the
mode for programming letters, see page 22.
Font Menu
Operating the machine – 21