Memory Module - HP PAVILION DV3 Maintenance And Service Manual

Memory module

Description
4096-MB (PC2-6400, 800-MHz, DDR2)
2048-MB (PC2-6400, 800-MHz, DDR2)
1024-MB (PC2-6400, 800-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the memory module
compartment cover to the computer.
2. Lift the rear edge (2) of the cover, swing it up and forward, and remove the cover (3). The memory
module compartment cover is included in the Plastics Kit, spare part number 506953-001.
3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
36 Chapter 4 Removal and replacement procedures
Battery on page 32).
Spare part number
506934-001
506933-001
506932-001