Bluetooth Module - HP PAVILION DV3 Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 468827-001.
Description
Bluetooth module (includes double-sided tape)
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard and switch cover (see
d. Display assembly (see
e. Top cover (see
f. System board (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth cable from the system board (1).
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the base enclosure.
Battery on page 32).
Optical drive on page
Hard drive on page 38)
Keyboard and switch cover on page
Display assembly on page
Top cover on page 49)
System board on page
35)
43)
52)
Component replacement procedures
Spare part number
398393-002
40)
55