HP P6000 User Manual page 82

Table 6 HP P6000 Performance Data Collector commands (continued)
Command
fn [short]
h, help, or evaperf without
a modifier
hc
hist
hps
ls
luns
mof
pd
pda
pdg
pfa [array]*
pfd
pfh
pfs
pfvd [vdisk]*
ps
rc
server host port
[username] [-usessl]
showcvconfig
vd
vdg
vdts
vdtsg [lunwwn]
vdrl
82 Monitoring array performance using HP P6000 Performance Data Collector
Description
Performs the following series of tasks:
Scans the hosts on the friendly name host list.
Queries HP P6000 Command View on each host for known friendly name
information.
Adds the friendly name information found to the fnames.conf file.
Displays help for HP P6000 Performance Data Collector.
Displays host connection information. The Port column in the output does not display
data for the HSV200 series of controllers onward; therefore, a hyphen (—) appears in
the Port column.
Displays the performance data/state changes for objects of a specified type within the
specified time range.
Displays host port statistics. The field Port WWN is included as part of the hps command
output in HP P6000 Performance Data Collector. This field provides the WWN of the
host port.
Displays a list of arrays that are visible to the host.
Displays LUNs visible to the host.
Displays output for the ls, as, cs, vd, vdg, hc, ps, hps, pd, pdg, drg, and drt
commands and saves the output for each command in a separate file. The -od modifier
is required.
Displays physical disk data.
Displays statistics for physical disk activity.
Displays the total physical disk data by disk group.
In Windows Performance Monitor, sets the array filter list.
Deletes the filter configuration for Windows Performance Monitor.
Displays help for the Windows Performance Monitor filter commands.
Displays the filter configuration for Windows Performance Monitor.
In Windows Performance Monitor, sets the virtual disk filter list.
Displays Fibre Channel port status.
Resets the error counters reported by the ps command.
Configures HP P6000 Performance Data Collector RPC server for remote client.
Displays HP P6000 Command View login parameters used for state data collection.
Displays virtual disk statistics and DR log disk information. Only virtual disks that have
been presented to a host are displayed.
Displays the total virtual disk data by disk group.
Displays virtual transfer size histograms. This command is available on the HSV200
series of controllers onward.
Graphs virtual disk transfer size histograms for all LUNs or a given WWN. This command
is available on the HSV200 series of controllers onward.
Displays virtual disk read latency histograms. This command is available on the HSV200
series of controllers onward.