Viewing Additional Information; Corrective Action Code; More Details; Configuring Event Notification - HP P6000 User Manual

Hewlett-packard personal computer user manual
Table of Contents

Advertisement

Description—The text description of the event. For more information, see
information" (page 54)
Notified?—Provides event notification status about the event.
Event Code—A hexadecimal number assigned to the event. For information about how the
hexadecimal number for the event code is formed, see

Viewing additional information

You can view additional information for controller and controller termination events by clicking the
following links in the event description:

Corrective action code

More details

Corrective action code
The corrective action code (CAC) shows you the recommended action to resolve the event. If the
event severity is informational, the CAC is 00 and there is no corrective action to take.
More details
Depending on the host operating system, the More details link directs you to open or save the
cveva00000x.txt file. This file is generated by the controller and pulls descriptions from various
event logs, including the controller port number. For port identifiers, see the Enterprise Virtual Array
user guide for your array model.

Configuring event notification

You can configure HP P6000 Command View to send an SNMP-compliant notification to any
vendor's SNMP-compliant management product such as Insight Manager, Tivoli, or EMC Patrol.
Event logs contain information about events that have occurred. In HP P6000 Command View,
you can configure:
Which EVA events (individually or by severity level) cause a notification to be sent
Which SNMP-enabled servers will receive P6000 Command View's notifications
For instructions for creating your own event configuration file, see the documentation for your
SNMP-compliant product.

Configuring host notification

You can specify the hosts that receive the SNMP traps that the management server generates for
events. Any SNMP-enabled host in the same network as the array can be used.
You can enter individual hosts or you can apply a customized host notification list to HP P6000
Command View.

Entering hosts individually

To enter hosts individually:
1.
From the Initialized Storage System Properties window, click System options.
The System Options window opens.
2.
Select Configure SNMP/event log notification.
3.
Select Configure SNMP host notification list.
4.
Click Modify host list.
The Modify Host Notification window opens.
5.
In the Host Name box, enter the domain name or IP address of the host.
54
Monitoring storage system events
and
"Event code types and descriptions" (page
"Viewing additional
95).
"Event code format" (page
95).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents