HP Z400 Quickspecs page 23

QuickSpecs
System Technical Specifications
Ownership Tag
Remote Wakeup/Remote
Shutdown
ASF 2.0 Compliant
Instantly Available PC
(Suspend to RAM - ACPI
sleep state S3)
Remote System Installation
via F12 (PXE 2.1) (Remote
Boot from Server)
ROM revision levels
System board revision
level
Start-up Diagnostics
(Power-on Self-Test)
Auto Setup when new
hardware installed
Keyboard-less Operation The system can be booted without a keyboard.
Localized ROM Setup
Asset Tag
Per-slot Control
Adaptive Cooling
Pre-boot Diagnostics
Industry Standard
Specification Support
Industry Standard
ACPI
ASF
ATA (IDE)
CD Boot
EDD
EHCI
PCI
PCI Express
PMM
SATA
without affecting other elements of the system.
Supports ACPI 2.0 for full compatibility with 64-bit operating systems.
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen.
System administrators can power on, restart, and power off a client computer from a remote location.
Allows workstation status to be monitored on a remote console.
Allows for very low power consumption with quick resume time.
Allows a new or existing system to boot over the network and download software, including the
operating system.
Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is available
through an industry standard interface (SMBIOS) so that management SW applications can use and
report this information.
Allows management SW to read the revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified.
Assesses system health at boot time with selectable levels of testing.
System automatically detects addition of new hardware.
Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages with
local keyboard mappings.
The user or MIS to set a unique tag string in non-volatile memory.
Allows I/O slot parameters (option ROM enable/disable, bus latency) to be configured individually.
Control parameters are set according to detected hardware configuration for optimal acoustics.
(Pre-video) critical errors are reported via beeps and blinks on the power LED.
Revision Supported by the BIOS
Advanced Configuration and Power Management Interface, Version 2.0c
Alert Standard Format Specification, Version 2.0
AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b
"El Torito" Bootable CD-ROM Format Specification Version 1.0
Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7
PCI Express Base Specification, Revision 2.0
POST Memory Manager Specification, Version 1.01
Serial ATA Specification, Revision 1.0a
Serial ATA 3.0Gb/s: Extensions to Serial ATA 1.5Gb/s, Revision 1.0
DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009
HP Z400 Workstation
Page 23