Wolf CSO24 Installation Manual page 14

Convection Steam Oven Installation
Verify Oven Operation
Before operating the convection steam oven, be sure to
read the entire use & care guide included with the oven for
important safety, operating and warranty information.
Turn on the electrical supply to the oven. Set the time of
day by pressing the TIME button, input the time by
rotating the control knob, and pressing the control knob
once the desired hour is set. Rotate the control knob again
for the desired minute, then press the control knob again.
Press the MODE button four times to select convection
mode. Verify the oven is coming up to temperature.
IMPORTANT NOTE: A small amount of smoke and odor
may be noticed during the initial break-in period. Refer to
the convection steam oven use & care guide for additional
information.
Troubleshooting
IMPORTANT NOTE: If the convection steam oven does not
operate properly, follow these troubleshooting steps:
• Verify electrical power is being supplied to the oven.
• Check the electrical connections to ensure that the
installation has been completed correctly.
• Refer to the troubleshooting guide in the convection
steam oven use & care guide.
• If the oven still does not operate properly, contact Wolf
factory certified service. Do not attempt to repair the
oven yourself. Wolf is not responsible for service
required to correct a faulty installation.
14