Maintenance Schedule; Blades Conforming To En13236 - Partner K3600 MKII Operator's Manual

Maintenance schedule

CAUTION! The chart is based on daily use of the equipment.
Support and guide rollers
Check the support rollers with regard to wear.
Check the guide rollers with regard to wear.
Lubricate the guide rollers.
Hydraulic System
Inspect the hydraulic hoses.
Inspect and clean the water nozzle.
Drive system
Check the condition of the drive wheel.
Water system
Inspect and clean the water nozzles on the water disc.
Inspect the water adjustment control.
Check the filter in the water coupling.
Controls
Check that the controls work.
Blade
Check the condition of the blade guard.
Check the water disc.

Blades conforming to EN13236

Partner K3600 MKII only conforms to 98/37/EC and EN13236 together with the blades listed below:
Type
Partner-Dimas
PXR XXD
ELR XXD (5,6 / .220)
SLR XXD
R550D-0355 (5,6 mm)
R530D-0355
R510D-0355 (5,6 mm)
Note: The blades are available in different hardnesses for different materials, this is stated with two digits, XX.
MAINTENANCE
Diameter, mm
350
350
350
350
350
350
Daily Twice a week
X
X
X
X
X
X
X
X
X
X
X
X
– 17
English