CHAPTER 2
INSTALLATION
This chapter will detail the proper installation of your optiMOS camera. In order to install and use the camera,
the following items are required:
optiMOS camera (supplied)
■
High Speed Data Cable (supplied)
■
High Speed PCIex4 Data Card
■
9V 8.33A power supply (supplied)
■
USB "installer" flash drive (supplied)
■
110V/220V power connection
■
A PC that meets the host computer requirements
■
Host Computer Requirements
The host computer for your optiMOS camera must include at a minimum:
Windows 7 operating system (64 bits)
■
2.0 GHz or faster Intel processor: either Xeon or Core i7
■
4+ GB RAM
■
250+ GB serial ATA (SATA) HDD and/or >64 GB solid state drive (SDD) for high-speed imaging and
■
storage
256+ MB slot-based ATI/NVIDIA video graphics card (i.e., not an "onboard/integrated graphics"
■
adapter)
USB drive or internet access to install the driver
■
At least 1 available PCIex4 slot
■
NOTE: Minimum requirements as of October 2013. Supported computer systems will change as new cameras,
computer hardware, and operating systems are introduced and older models become obsolete. For current
information on recommended computer specifications, please visit:
recommended-computer-specifications.php
www.qimaging.com
©2014 QImaging. All rights reserved. QI_OPTIMOS_UM_Rev_A0
optiMOS USER MANUAL
http://www.qimaging.com/support/
4