Usb Cable - HP iPAQ hx4700 User Manual

Charging with the HP Desktop Cradle
and USB Cable
An alternative method of charging the Pocket PC is to charge the
unit by using a USB cable. However, because this charging
method drains the host battery (i.e., laptop), you must enable
USB charging on the Pocket PC before you can charge the unit.
To charge your Pocket PC using the HP Desktop Cradle and USB
Cable:
1. Turn on USB charging by tapping Start > Settings > System
tab > Power icon on the Pocket PC.
2. Select the USB Charging tab, and then check Use USB
Charging.
3. Tap OK once USB Charging has been enabled.
4. Connect one end of the USB cable to the bottom of the
Pocket PC.
5. Connect the USB cable to an available USB port on your
USB powered device, such as a laptop computer.
Note:
than with an AC Adapter.
User's Guide
The Pocket PC charges slower when using an USB cable
Managing the Battery
3–12