Close The Wlan Program; View Existing Profiles; Select An Existing Profile - HP iPAQ h5400 Series Reference Manual

Using the Wireless LAN
The encryption key is case sensitive. Valid values for
hexadecimal keys are "0–9 and A–F." Valid values for
alphanumeric keys are "0–9, a–z, and A–Z."
The length of the key depends on which wireless encryption
mode was selected: 64 bit (uses 5 alphanumeric or 10
hexadecimal values) or 128 bit (uses 13 alphanumeric or 26
hexadecimal values).
6. Select a Key number from the down arrow list.
7. Tap Finish.

Close the WLAN Program

1. Tap the iPAQ WLAN icon in the lower right corner of the
Today screen.
2. Tap Close on the pop-up menu.

View Existing Profiles

Tap the iPAQ WLAN icon in the lower right corner of the
Today screen.
Existing profiles are listed in the top section of the pop-up menu.
The active profile is indicated by a check mark.

Select an Existing Profile

1. Tap the iPAQ WLAN icon in the lower right corner of the
Today screen.
2. Tap a profile name from the list in the top section of the
pop-up menu. The profile is automatically loaded.
3–10 Reference Guide