Add A Device - HP iPAQ h5400 Series Reference Manual

Add a Device

You must add a device to the wheel before you can control it with
the universal remote. You can set up the universal remote to
control up to 12 devices in a room.
The universal remote comes pre-programmed with codes for
thousands of infrared supported devices. You can download other
codes from the Nevo Web site,
You can automatically transfer all the remote control settings to
your iPAQ Pocket PC.
The first time you use the universal remote, you will see only the
Add Devices and Add Activities icons on the device wheel.
A wizard guides you through the process of adding a device. To
exit the wizard at any time, tap the Cancel button. To return to
the previous page, tap the Back button.
To add a device:
1. From the Start menu, tap Nevo.
2. Select one of the following:
a. Tap the Add Device icon.
b. Tap the Wrench icon, and then Add Device.
Reference Guide
Using the Universal Remote
http://www.mynevo.com
10–3