GE 29869 User Manual page 11

o
o
GnNnnar Pnooucr Cann
To keep your answerer working and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for
example, motors or fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping answerer and/or other rough treatment.
. Clean with a soft cloth.
o Never use a strong cleaning agent or abrasive powder because this will damage the
f i n i s h .
o Retain the original packaging in case you need to ship it at a later date.
Snnvrcn
lf trouble is experienced with this equipment, for repair or warranty information, please
contact customer service at 1-800-t148-0329. lf the equipment is causing harm to the
/
telephone network, the telephone company may request that you disconnect the equipment .
until the problem is resolved,
This product may be serviced only by the manufacturer or its authorized service agents.
Changes or modifications not expressly approved byATLINKS USA, Inc. could void the
user's authority to operate this product. For instructions on how to obtain service, refer to
the warranty included in this guide or call customer service at 1-800-448-0329.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager. Consumer Relations
P O Box 1976
Indianapolis, lN 46206
Attach your sales receipt to the booklet for future reference or jot down the date this product
was purchased or received as a gift.This information will be valuable if service should be
required during the warranty period.
Purchase date
Name of store
20
the greeting.
21
TnounrEsHoorrNc TrPs
Problem
Explanation/Solution
Doesn't answer, or answers on 10th rinq
Make sure answerer is turned on.
Memory is full, erase some messages.
CheckAC power and phone line connections.
Incoming messages are incomplete
. Was an extension phone picked up?
. The caller left a message that is longer than the
message length you set during setup.
r Memorv is full.
o You accidentally pressed a mailbox button
when you were playing the messages.
Won't respond to remote commands
o Must use touch-tone phone.
o Must enter correct security code.
o Did unit hang up? lf you take no action for a
period of time, it automatically hangs up.
Answerer doesn't work
. Unplug power cord from the electrical outlet
and plug it back in to reset the answerer. lf that
doesn't work, unplug the power cord from the
back of the unit and plug it back in.This is a
complete reset.
Can't hear messages
o Adjust volume control.
Unit announces "Battay Lna"
. Install a new g-volt alkaline batterv.
Can't restart message
o You must play message for at least 5 seconds
before pressing PREVIOUS button.
Messages indicator flashes rapidly
o Memory is full. Erase messages.
Battery good but messages were lost . Was the AC power supply unplugged from back
of unit?
Greeting continues to play even after
an e)ftension phone is picked up
r This is normal operation. Auto disconnect is
delaved for 2 seconds after the unit answers a
call. lfyou are nearthe unit, press STOPto stop