Fujitsu DeskPower E600 Series User Manual page 49

4 Push the slot cover into the slot in the direction of the arrow. Ensure that the point of
the slot cover engages on the outside of the board bracket.
5 Fold up the retaining bracket again so that it engages.
CAUTION
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The upper slot is suitable for low-profile cards with an adapter.
33